Level & Tape Logo
Level & Tape Visual DIY Calculators
Open Stair Tool

Fence Picket Spacing & Material Calculator

Estimate exact pickets, 4×4 posts, 2×4 horizontal rails, and concrete bags for Privacy, Spaced, or Shadowbox fences with an instant elevation preview.

Wood Fence Material Planning Guide

Always measure your actual picket width with a tape measure before ordering—wet pressure-treated 1×6 pine pickets often measure 5-1/2" wide, whereas cedar pickets can vary between 5-3/8" and 5-1/2". Order 10% extra pickets so you can cull twisted, split, or loose-knot boards at the job site.

Frequently Asked Questions

How many 1x6 fence pickets do I need per 8-foot section? +
A standard nominal 1x6 dog-ear fence picket actually measures 5-1/2 inches wide. For an 8-foot (96-inch) solid privacy section with zero gap, divide 96 by 5.5 = 17.45, meaning you need 18 pickets per 8-foot bay (before adding 5–10% waste for warped boards).
How deep should I set 4x4 wood fence posts? +
A widely accepted structural rule is to bury one-third of the post length underground (at least 24 inches deep for a 6-foot fence, or 30–36 inches in windy regions or deep frost zones). Using 8-foot posts for a 6-foot privacy fence gives you 2 feet of embedment.
How many bags of concrete do I need per fence post? +
For a standard 10-inch diameter hole dug 24 inches deep around a 4x4 post, plan on roughly two 60-pound bags (or one and a half 80-pound bags) of fast-setting concrete per post.
Why does a shadowbox fence use more pickets than a privacy fence? +
A shadowbox (board-on-board) fence alternates pickets on both sides of the horizontal rails with an overlap so it looks identical from both yards while letting wind pass through. Depending on your gap spacing, it typically requires 20% to 40% more pickets than a standard single-sided privacy fence.

Next Step: Related Visual Calculators

All Tools →