Board Foot & Lumber Cost Calculator
Build a complete multi-species hardwood bill of materials in seconds. Add mixed board sizes (4/4 through 12/4), enter your lumberyard's price per board foot, apply a realistic milling waste factor, and print your shopping list.
Net Board Feet
39.33 BF
7 total boards
Total to Order (+15%)
45.23 BF
Includes +5.90 BF waste
Net Material Cost
$515.67
Before waste margin
Total Budget (+15%)
$593.02
Estimated lumberyard bill
| Part / Species | Qty | Thickness (in) | Width (in) | Length (ft) | $/BF | Row BF | Subtotal | |
|---|---|---|---|---|---|---|---|---|
| 23.33 | $291.67 | |||||||
| 16.00 | $224.00 |
What is 1 Board Foot (BF)?
One board foot equals a volume of 144 cubic inches — visualize a rough board measuring 1" thick × 12" wide × 12" long (or 1" × 6" × 24"). Hardwood dealers bill by nominal rough-sawn quarter thickness (4/4 = 1", 8/4 = 2") before planing.Hardwood Quarter Thickness Reference Chart
| Quarter Size | Rough Thickness (Billed) | Typical S2S Finished | Common Woodworking Use |
|---|---|---|---|
| 4/4 | 1.00" | 13/16" (0.81") | Cabinetry, shelving, panels, boxes |
| 5/4 | 1.25" | 1-1/16" (1.06") | Stair treads, sturdy tabletops, doors |
| 6/4 | 1.50" | 1-5/16" (1.31") | Dining tables, thick counter edges |
| 8/4 | 2.00" | 1-3/4" (1.75") | Table legs, workbenches, butcher blocks |
Frequently Asked Questions
What is the exact formula for board feet? +
Board Feet (BF) = (Thickness in inches × Width in inches × Length in feet) ÷ 12. If all three measurements are in inches, divide by 144 instead. One board foot always equals 144 cubic inches of wood volume.
What do 4/4, 5/4, and 8/4 mean at a hardwood lumberyard? +
Hardwood thickness is sold in quarters of an inch before surfacing. 4/4 ("four-quarter") is 1 inch rough-sawn (typically finishes around 13/16" after S2S planing), 5/4 is 1-1/4 inches, 6/4 is 1-1/2 inches, and 8/4 is 2 inches rough-sawn.
How much extra waste percentage should I add when buying rough hardwood? +
For straight, clear S4S (surfaced four sides) boards, 10% waste is usually enough. For rough-sawn lumber (FAS or Select grade), add 15%–20% to cover end-check trimming, sapwood defects, and kerf losses. For rustic or knotty character boards, budget 25% extra.
Are board feet calculated using nominal or actual thickness? +
Hardwood yards calculate board feet using the rough-sawn nominal quarter thickness (e.g., 1.0" for 4/4 lumber even if it has been skip-planed to 13/16"). Width is measured to the actual random width of the board.
Next Step: Related Visual Calculators
All Tools →Stair Stringer Calculator
Live →Calculate exact rise, run, stringer length, throat depth, and IRC code compliance with a live SVG blueprint.
Deck Baluster Spacing Calculator
Live →Compute evenly spaced deck spindles guaranteed under the 4-inch IRC sphere rule with cumulative tape marks.
Fence Picket Spacing Calculator
Live →Lay out privacy, spaced, or shadowbox fence pickets with post counts, rails, and concrete bag estimates.
Crown Molding Miter & Bevel Calculator
Live →Find exact compound miter saw settings for inside and outside corners at any spring or wall angle.